| Paketname | setserial |
| Beschreibung | controls configuration of serial ports |
| Archiv/Repository | Offizielles Ubuntu Archiv lucid (main) |
| Version | 2.17-45.2 |
| Sektion | comm |
| Priorität | extra |
| Installierte Größe | 176 Byte |
| Hängt ab von | libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0 |
| Empfohlene Pakete | |
| Paketbetreuer | Ubuntu Developers |
| Quelle | |
| Paketgröße | 52404 Byte |
| Prüfsumme MD5 | fb27e2ccea6ad45f0c294cee7b8f76c3 |
| Prüfsumme SHA1 | 434c7a98c203ce0cea62d962a889ffa846cd51f1 |
| Prüfsumme SHA256 | 0d8a0dca3baeb1e1855ac26e510e8b828ee8837942aead321bb5f89a89ad48c1 |
| Link zum Herunterladen | setserial_2.17-45.2_i386.deb |
| Ausführliche Beschreibung | Set and/or report the configuration information associated with
a serial port. This information includes what I/O port and which IRQ
a particular serial port is using.
.
This version has a completely new approach to configuration, so if you
have a setup other than the standard ttyS0 and 1, you will have to get
your hands dirty.
.
By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4.
If you have other serial ports (such as an AST Fourport card), or
if you have mapped the IRQs differently (perhaps COM3 and 4 to other
IRQs to allow concurrent access with COM1 and 2) then you must have this
package.
|